WSE-630(PNE30-630ADP)

Feature code：

Main characteristics:

●IGBT inverter technology
●Microcomputer control technology
●Welding parameter automaticall‍↔σy stores
●Five operating mode for "σ↑AC Square wave TIG weld&♣ ‌ing
●Parameters in panel are↔σ set by coordinate-type touch key and the sin≈φgle knob for adjustment
●Eight operating mode both fπ€or DC TIG, DC pulse TIG
●AC Square Wave TIG / Pul☆®πse TIG / DC TIG / Sp←λ→ot TIG/MMA in this machine
●Mainly be used for welding of aluminum, magne$₹α•sium aluminum alloy and its alloys φ€↕βin the field of aviation,
●aerospace, air separation equipm•♥Ω★ent, radiator, aluminum pipe,≈✔ bicycle, pressure vessel, furniture industry a'φnd so on
●Current output with Quasi s∞₹>&inusoidal waveform;
●Welding cable can be lengthene÷∑d to 60 meters (automat✔≈±ically alarm when the cable wings o<↔φΩn welding mode);
●Double welding function is optional;
●Foot switch is optional;
●Current displays effective ₹"₽value in AC TIG mode;
●Interface for the alarm function of wa§↓ter shortage

Model	WSE-630
Company type	PNE30-630ADP
Rated input voltage(V)	3 phase 380V±(15~20)% 50~60Hz
Rated Input capacity (KW)	25.2
No-load voltage (V)	83±6%
Output current adjus₩£>ting range(A)	20～630
Pulse frequency (Hz)	0.5～200
Pulse ratio range	10%～90%
Slope up time (s)	0～10
Slope down time (s)	0～10
Spot time (s)	0.2～5
Pre-flow time (s)	0.1～1.5
Post-flow time (s)	1～15
Surge current range(MMA)	0.01～0.5
AC frequency (Hz)	20～70
AC balance	10%～50%
Duty cycle (40℃)	60%
Efficiency	≥85%
Power factor	0.93
Insulation grade	F
Case protection grade	IP21S
Cooling	Wind
Dimensions (mm)	700×360×780
Net weight (kg)	72