WSE-315(PNE30/32-315ADP)

Feature code：

Main characteristics:

●IGBT inverter technology
●Microcomputer control technology
●Welding parameter automatically stores
●Five operating mode for AC Squγ ¥‌are wave TIG welding
●Parameters in panel are set by coordinate-t₽δype touch key and the &¥★single knob for adjustment
●Eight operating mode both for DC TI $G, DC pulse TIG
●AC Square Wave TIG / Pulse TIG / DC TIG / S♥₩λpot TIG/MMA in this machine
●Mainly be used for welding of aluminum, magnes₽↓ ium aluminum alloy and its alloys σβ♠Ωin the field of aviation,
●aerospace, air separation equipm♦☆₩ent, radiator, aluminum pipe, bicycle, γ‌pressure vessel, furniture indus¥§try and so on
●Current output with Quasi sinuso€idal waveform;
●Welding cable can be lengthened to★φ 60 meters (automati★©cally alarm when the cable ‌α wings on welding mode);
●Double welding function is optional;
●Foot switch is optional;
●Current displays effective value in AC TIG mod&€•>e;
●Interface for the alarm function "≤♠♦of water shortage

Model	WSE-315
Company type	PNE30/32-315ADP
Rated input voltage(V)	3 phase 380V±(15~20)% 50‌γ™≤~60Hz
Rated Input capacity (KW)	12.1
No-load voltage (V)	66±5%
Output current adjusting range(A)	12～315
Pulse frequency (Hz)	0.5～200
Pulse ratio range	10%～90%
Slope up time (s)	0～10
Slope down time (s)	0～10
Spot time (s)	0.2～5
Pre-flow time (s)	0.1～1.5
Post-flow time (s)	1～15
Surge current range(MMA)	0.01～0.5
AC frequency (Hz)	20～100
AC balance	10%～50%
Duty cycle (40℃)	60% / 100%
Efficiency	≥85%
Power factor	0.93
Insulation grade	F
Case protection grade	IP21S
Cooling	Wind
Dimensions (mm)	700×360×780
Net weight (kg)	63